Garmin GPSMAP 3006C Network Bundle DISCONTINUED

The GPSMAP 3010C and the GPSMAP 3006C launch Garmin into the world of Marine networking, with plug-and-play systems that put GPS, weather, sonar, radar, and other important data at boaters’ fingertips.

Both units are waterproof and feature a sunlight readable, 256-color, 640 x 480-pixel VGA display. The screen size for the GPSMAP 3006C is 6.4" diagonal. These multifunction displays (MFDs) are powered by a high-speed processor and graphics controller for fast redraw of charts and weather graphics. They communicate with the Garmin Marine Network through a 100-megabit Garmin-proprietary ethernet-based network. The entire system is waterproof and completely plug-and-play—the MFDs automatically detect any and all peripherals once they’re connected. Boaters can connect a GPS antenna and one remote sensor directly to the MFD. Or, with the addition of the GMS™ 10 Network Port Expander, users can connect multiple MFDs and sensors to the same network. Each networked MFD can be configured independently.

A unique feature to the Garmin Marine Network is the addition of the GDL 30 weather data receiver. Through a partnership with XM WX Satellite Weather, mariners can—for the first time—access real-time graphical weather data for the United States directly on the GPSMAP 3010C or 3006C—without the need for a separate PC interface. For those wanting more than 120 channels of XM Satellite Radio along with weather data, Garmin also offers the GDL 30A—which provides a unique audio-channel interface on the 3010C and 3006C that allows for connection to an on-board stereo.

GPSMAP 3000 series products receive sonar data through the GSD 20, a proprietary "black box" sounder which offers 4,000 watts of peak-to-peak power (500 watts RMS) in a dual-frequency transducer. The Garmin Marine Network will be compatible with Garmin's new marine radar that is expected for the 2005 marine season. More information on the radar should be available in late 2004.

The Garmin Marine Network also offers a unique network upgrade system. The user simply prompts the MFD to read the current software version of all components within the network, and writes them onto a Garmin data card. Then the user uploads this data via a PC to the Garmin website, where the newest software versions are downloaded to the data card. The entire system is automatically updated once the card is re-inserted into the MFD.

GPSMAP 3006C Features:

WAAS-enabled, 12 parallel channel GPS sensor with 30 ft. cable length

High-speed RISC processor and graphics controller for fast screen redraw

Use individually or connect and control multiple displays and sensors with built-in high-speed network

View weather overlays with optional GDL 30/30A remote XM marine weather/audio satellite receiver

Add sonar with optional GSD 20 remote sounder

10.25" W x 6.5" H x 3.25" D unit dimensions

Dual card slots; accepts data cards programmed with Garmin’s BlueChart cartography

6.4"-diagonal, color TFT, full VGA, sunlight-readable display

Weighs approximately 3.0 lbs.

Backlit display and keypad

Permanent user data storage; no memory battery required

Two composite video inputs for on-board cameras; 1 VGA PC monitor video output

Three data ports allow for NMEA 0183 and proprietary Garmin

Navigation voice prompts (future software update required) with optional speaker

Remote operation using optional Garmin infrared remote control

Water resistant; meets IEC 60529 IPX7 standards

Built-in worldwide basemap showing cities, interstates, coastline detail and U.S. tide stations

Compatible with Garmin’s BlueChart marine cartography and most MapSource products, including Fishing Hot Spots and MetroGuide

4000 user waypoints with name and graphic symbol; 50 reversible routes with 300 waypoints/route

10,000 point automatic track log; 15 saved tracks let you retrace your path in both directions; 700 points/saved track

Position formats include Lat/Lon, UTM, Loran TDs, Maidenhead, MGRS; and user grid

Audible alarms for anchor drag, arrival, off-course, shallow water, deep water, proximity waypoint, clock, and battery

Large-numbers option for easy viewing

Course and speed filtering

Built-in celestial tables for sun and moon calculations

Multiple languages (future software update required)

Box Contains:

GPSMAP 3006C

Garmin GDL-30A Weather Data / XM Audio Receiver

Garmin GSD 20 Black-Box Sounder

Garmin GMS 10 Network Port Expander

GPS 17 WAAS-enabled sensor

A/V cable

Power/data cable

Bailmount

Unit cover

Image shows multiple MFDs and sensors connected to the Garmin Marine Network

• Designed to support the connection of multiple sensors & GPSMAP 3000 series chartplotters to the new Garmin Marine Network.
• Connections are completely waterproof.
• The switch has LED indicators for individual line status.
• Completely plug-&-play (automatically detects unit at connection).
• 100 Mbit Garmin proprietary network.
• Same network cable for direct unit-to-unit or unit-to-port expander.
• Meets rigid IEC 60529 IPX7 submersible standard.